FREQUENTLY ASKED QUESTIONS
Q. I ordered one of your security systems. How long will it take to get here?
A. Shipping varies by location. We will provide you with a tracking number so you may track it's progress.
Q.What is the main source of power to the system?
A. A 12 volt 7.2 amp hour or a 10 amp hour battery.
Q. How do I know if my battery is charged?
A. The battery indicator will be green meaning it has 12v + If the battery indicator is orange or red it is indicating that the battery needs to be charged for the unit to function properly.
Q. How many additional remotes can I have with my unit?
A. There is no limit on the amt of remotes that you can program to a unit.
Q. How do I program additional remotes?
A. To program additional remotes remove the front cover of the unit, find and hold down the red programming button on the circuit board until 3 quick chirps are heard then release, press the lock or arm button on the remotes that you wish to program. Once this is completed wait 3 minutes for the unit to exit programming mode.
Q. Is the vibration sensor adjustable?
A. Yes, the sensor is set to the most sensitive setting before the unit is shipped, if additional sensitivity is needed you can purchase a tilt sensor from Gps Security, Inc. This will add to the sensitivity of the unit, by sounding the alarm if the trailer’s tongue is lifted up or down.
Q. How long will the battery power the system with out solar power?
A. 3 days, if there is going to be additional days the unit does not receive solar power you will need to plug in a 12v battery charger to the unit to keep the battery from going dead.
Q. How many door switches can be added to the system?
A. An unlimited amount of door switches can be added to the system in series.
Q. Where is the best place to mount my unit in a pull behind trailer?
A. You should mount the unit in the very back end of the trailer. This area receives the most vibration.
Q. What should I do if I am having problems arming and disarming my unit?
A. Unhook battery from unit, check battery’s voltage with a multi meter (not included) battery’s voltage must be 12volts or higher, if it is not charge battery with a 12 volt trickle charger or replace battery. You may also want to check the battery in the key chain remotes, make sure when you press the lock/unlock keys the blue light is lit on the remotes.
Q. Does the solar panel need direct sunlight?
A. Yes, parking your trailer under a tree, not keeping the solar panel clean/clear of debris (i.e. leaves, snow, thick dust) will greatly diminish the solar panel’s ability to keep the battery fully charged.
Q. When should I replace the battery in the unit?
A. You should replace the 12v battery once a year for optimal performance from your system.
Q. Can I add GPS or cellular notification to my existing unit?
A. Yes, call GPS Security at 1(801)255-9201 and speak to a representative.
Q. I try to arm my trailer and I hear 3 chirps
A. Check to make sure all doors are closed and switches have continuity. For any further questions that you may have that are not covered by this information, please call 1(801)255-9201.
Q. I am thinking about purchasing a TD 6000G how many people can be notified via text message/email if a break in occurs?
A. Up to 3 separate cell phone numbers or 3 email addresses or a combination of both can be notified if a break in should occur.
Q. I ordered one of your security systems. How long will it take to get here?
A. Shipping varies by location. We will provide you with a tracking number so you may track it's progress.
Q.What is the main source of power to the system?
A. A 12 volt 7.2 amp hour or a 10 amp hour battery.
Q. How do I know if my battery is charged?
A. The battery indicator will be green meaning it has 12v + If the battery indicator is orange or red it is indicating that the battery needs to be charged for the unit to function properly.
Q. How many additional remotes can I have with my unit?
A. There is no limit on the amt of remotes that you can program to a unit.
Q. How do I program additional remotes?
A. To program additional remotes remove the front cover of the unit, find and hold down the red programming button on the circuit board until 3 quick chirps are heard then release, press the lock or arm button on the remotes that you wish to program. Once this is completed wait 3 minutes for the unit to exit programming mode.
Q. Is the vibration sensor adjustable?
A. Yes, the sensor is set to the most sensitive setting before the unit is shipped, if additional sensitivity is needed you can purchase a tilt sensor from Gps Security, Inc. This will add to the sensitivity of the unit, by sounding the alarm if the trailer’s tongue is lifted up or down.
Q. How long will the battery power the system with out solar power?
A. 3 days, if there is going to be additional days the unit does not receive solar power you will need to plug in a 12v battery charger to the unit to keep the battery from going dead.
Q. How many door switches can be added to the system?
A. An unlimited amount of door switches can be added to the system in series.
Q. Where is the best place to mount my unit in a pull behind trailer?
A. You should mount the unit in the very back end of the trailer. This area receives the most vibration.
Q. What should I do if I am having problems arming and disarming my unit?
A. Unhook battery from unit, check battery’s voltage with a multi meter (not included) battery’s voltage must be 12volts or higher, if it is not charge battery with a 12 volt trickle charger or replace battery. You may also want to check the battery in the key chain remotes, make sure when you press the lock/unlock keys the blue light is lit on the remotes.
Q. Does the solar panel need direct sunlight?
A. Yes, parking your trailer under a tree, not keeping the solar panel clean/clear of debris (i.e. leaves, snow, thick dust) will greatly diminish the solar panel’s ability to keep the battery fully charged.
Q. When should I replace the battery in the unit?
A. You should replace the 12v battery once a year for optimal performance from your system.
Q. Can I add GPS or cellular notification to my existing unit?
A. Yes, call GPS Security at 1(801)255-9201 and speak to a representative.
Q. I try to arm my trailer and I hear 3 chirps
A. Check to make sure all doors are closed and switches have continuity. For any further questions that you may have that are not covered by this information, please call 1(801)255-9201.
Q. I am thinking about purchasing a TD 6000G how many people can be notified via text message/email if a break in occurs?
A. Up to 3 separate cell phone numbers or 3 email addresses or a combination of both can be notified if a break in should occur.
OUR PROMISE
*insert promise here*
OUR LOCATION
PO Box 8712
Midvale, UT 84047
Telephone: (801) 255-9201
Email: sales@gpssecurityinc.com
*insert promise here*
OUR LOCATION
PO Box 8712
Midvale, UT 84047
Telephone: (801) 255-9201
Email: sales@gpssecurityinc.com